Bathroom Remodeling in Glen Burnie — Marley & Ferndale Homes

Glen Burnie bathrooms we remodel are mostly in 1940s–1960s row houses and ranchers across Marley, Ferndale, and Pumphrey, plus 1970s split-levels and newer townhomes near BWI and Cromwell Station. A newer wave of demand comes from the planned communities on the east side of town — single-family homes and townhomes in Tanyard Shores, Tanyard Cove North, and Enclave at Arundel Hills — where builder-standard baths (fiberglass surrounds, cultured-marble tops, framed glass) get upgraded to custom tile showers within the first few years. These post-war baths are small — often 5x7 or tighter — with original tile, cast-iron tubs, and no real storage, so space-maximizing design is the priority: wall-mounted vanities, recessed niches, pocket or outswing doors, and glass panels instead of bulky enclosures. Behind the walls, older Glen Burnie homes can hide galvanized plumbing, dated wiring, or asbestos-era materials, and we plan for all three before demo starts. MHIC #113057.

How Much Does Bathroom Remodeling Cost in Glen Burnie, MD?

Bathroom remodels in Glen Burnie typically run $14,000–$22,000 for a hall bath and $25,000–$45,000 for a master with a custom tile shower, vanity, and updated layout. Cosmetic refreshes start at $7,500. Because Glen Burnie bathrooms tend to be smaller than newer construction, many projects land in the lower half of the hall-bath band — though 1940s–60s homes that need galvanized supply replacement or remediation of asbestos-era materials can shift the budget, which is why we inspect before pricing. Anne Arundel County permit fees run $200–$450 for permit-required work. Free estimates: 443-856-5379.

Get a Free Estimate or call 443-856-5379.

How Does PRG Handle Bathroom Remodeling Projects in Glen Burnie?

In-home consultation to measure and check what's behind the walls — Glen Burnie's post-war homes get extra attention up front for galvanized supply lines, dated wiring, and asbestos-era materials so the budget reflects reality rather than surprises mid-demo. We produce selections (tile, vanity, fixtures, glass) and a line-item budget with space-maximizing layout options. After contract, materials are ordered and the Anne Arundel County permit is filed. Demo: 2–3 days. Rough plumbing/electrical: 2–3 days. County rough inspection. Schluter or Wedi waterproofing, tile, vanity, fixtures, glass, and final inspection. Standard hall bath: 3–4 weeks active. Master with custom shower: 5–7 weeks.

Bathroom Remodeling for Glen Burnie Homes

Glen Burnie offers some of Anne Arundel County's most affordable housing, and homeowners here frequently invest in remodeling to modernize homes built in the post-war era. PRG specializes in working with the older construction common in Glen Burnie—addressing outdated plumbing and electrical while delivering modern kitchens and bathrooms. At the same time, newer waterside and planned communities like Tanyard Shores, Tanyard Cove North, and Enclave at Arundel Hills, along with the Towns at Parke West by Sturbridge Homes and Washington Mews by Ameri-Star Homes, bring single-family homes and townhomes with builder-standard kitchens, baths, and bare backyards that owners upgrade within the first few years — approximately 15-20 minutes from our Gambrills location under normal traffic.

Do You Need a Permit for Bathroom Remodeling in Glen Burnie, MD?

Anne Arundel County requires permits for bathroom remodels involving plumbing moves, added electrical circuits, or layout changes. Cosmetic-only updates don't require permits. Standard residential bathroom permits issue within 2–3 weeks. Required inspections: rough plumbing, rough electrical, and final. In 1940s–60s Glen Burnie homes, opening a wet wall often exposes galvanized supply lines or wiring that current code requires updating — we scope that into the estimate rather than treating it as a change order, and any asbestos-era materials get proper remediation.

Recent Bathroom Remodeling Projects by PRG

See more completed projects →

Why Do Glen Burnie Homeowners Choose PRG?

• Post-war housing experience — we plan for galvanized plumbing, dated wiring, and asbestos-era materials common in Marley, Ferndale, and Pumphrey homes instead of discovering them mid-project.
• Space-maximizing design for Glen Burnie's compact baths — wall-mounted vanities, recessed storage niches, and glass panels that make a 5x7 bathroom live larger without moving walls.
• Bonded shower waterproofing on every build (Schluter KERDI-BOARD or Wedi). We do not use cement board with rolled liquid membrane.
• MHIC #113057, fully insured. Anne Arundel County permits managed start to finish, owner-present on every job.

Which Areas Near Glen Burnie Does PRG Serve?

Serving Glen Burnie, Marley, Ferndale, Pasadena, Severn, and Millersville. Our Gambrills shop is about 20 minutes from most Glen Burnie addresses.

What Is Included in PRG's Bathroom Remodeling Service?

A bathroom remodel is one of the highest-ROI home improvements you can make. PRG handles everything from straightforward fixture upgrades to full gut renovations with layout changes, custom tile work, and accessibility modifications. See the full Bathroom Remodeling service overview.

Bathroom Remodeling Cost by Scope in Glen Burnie, MD

PRG's installed 2026 price ranges for Glen Burnie (labor and standard materials, final pricing after a site visit), last updated September 15, 2026 in PRG's Maryland cost guides.

Full breakdowns, per-square-foot math and line-item pricing: bathroom remodeling cost guide .

Bathroom Remodeling FAQ for Glen Burnie, MD

How much does a bathroom remodel cost in Glen Burnie, MD?

A hall-bath remodel in Glen Burnie typically costs $14,000–$22,000, and the smaller footprints common in Glen Burnie homes often land projects in the lower half of that range. A master bath with a custom tile shower and updated layout runs $30,000–$60,000. Cosmetic refreshes start at $7,500. Older homes that need galvanized supply replacement or asbestos-era remediation can add to the budget — we scope that during the estimate.

How do you make a small Glen Burnie bathroom feel bigger without moving walls?

Most of the gain comes from design, not square footage: a wall-mounted vanity opens floor area, recessed niches replace over-toilet shelving, a frameless glass panel replaces a bulky enclosure or curtain, and larger-format tile with fewer grout lines visually expands the room. In Glen Burnie's 1940s–60s baths these choices routinely make a 5x7 room feel dramatically larger for far less than an expansion would cost.

Will my post-war Glen Burnie home need plumbing or electrical upgrades during a bathroom remodel?

Often, yes. 1940s–60s Glen Burnie homes frequently have galvanized supply lines and wiring that predates current GFCI requirements, and some finishes from that era contain asbestos that needs proper remediation during demolition. We inspect before pricing so required upgrades are scoped into the estimate up front — never a mid-project surprise.

Do you remodel bathrooms in Glen Burnie's newer communities like Tanyard Shores?

Yes. Single-family homes and townhomes in Tanyard Shores, Tanyard Cove North, and Enclave at Arundel Hills come with builder-standard baths — fiberglass tub-shower units, cultured-marble vanity tops, and framed glass — that owners typically upgrade to custom tile showers with frameless glass within the first few years. Because these homes are new, there are rarely plumbing surprises, so budgets go to finishes instead of infrastructure.

Is PRG licensed and insured for bathroom remodeling in Glen Burnie?

Yes. PRG Home Improvement LLC holds MHIC #113057, carries general liability insurance, and is bonded. We work throughout Anne Arundel County year-round, and our Gambrills shop is about 20 minutes from Glen Burnie.

How much does a bathroom remodel cost in Maryland?

In Anne Arundel and Howard County a bathroom remodel runs $5,000–$12,000 for a cosmetic refresh, $15,000–$30,000 for a standard remodel with new tile and fixtures, and $35,000–$60,000+ for a full gut renovation with layout changes. By room, a full hall bath runs $14,000–$22,000 and a master bath $25,000–$45,000 in 2026. See the full Maryland bathroom cost breakdown.