Fulton Bathroom Remodeling — Maple Lawn Builder-Grade Baths

Fulton bathroom remodels we handle are mostly luxury primary-suite renovations and guest-bath upgrades in the larger, newer homes of Maple Lawn, Emerson, Pointers View, and Reservoir. These 10–20-year-old homes have builder-grade primary baths — fiberglass surrounds, cultured-marble vanity tops, builder tile — that owners want elevated to spa-level: large frameless-glass tile showers, freestanding tubs, double vanities, and heated floors. We also remodel baths in the established colonials on rural Fulton and Lime Kiln Roads. Howard County permits (DILP) apply. MHIC #113057.

How Much Does Bathroom Remodeling Cost in Fulton, MD?

Bathroom remodels in Fulton typically run $15,000–$30,000 for a standard hall or guest bath with new tile, fixtures, and vanity, and $35,000–$60,000+ for a full gut of a primary suite with a custom tile shower, freestanding tub, double vanity, and updated layout. Because Fulton homes are larger and finish expectations are higher, primary-suite projects frequently land at the upper end with heated floors, frameless glass, and natural-stone tile. Tile selection, shower waterproofing system, and vanity grade drive most of the variance. We provide a line-item budget after the consultation. Free estimates: 443-856-5379.

Get a Free Estimate or call 443-856-5379.

Our Bathroom Remodeling Process in Fulton

We start with an in-home consultation to measure, discuss how you want the suite to function, and review selections at the level Fulton homes call for. We produce a design and line-item budget. After contract we order materials (custom vanities and stone run longer) and file the Howard County DILP permit. Demo runs 2–3 days, rough plumbing and electrical 2–3 days, then the DILP rough inspection. We install bonded waterproofing (Schluter or Wedi), tile, vanity, fixtures, glass, and any heated-floor system, followed by the final inspection. A standard bath runs 3–4 weeks active; a primary-suite gut runs 5–8 weeks.

A bathroom remodel is one of the highest-ROI home improvements you can make. PRG handles everything from straightforward fixture upgrades to full gut renovations with layout changes, custom tile work, and accessibility modifications.

Bathroom Remodeling Services We Offer in Fulton

• Full gut renovations with new layouts, plumbing, and electrical
• Shower and tub replacements including walk-in and curbless showers
• Vanity, countertop, and cabinetry installation
• Custom tile work for floors, walls, and shower surrounds
• Aging-in-place modifications including grab bars and wider doorways
• Ventilation and moisture management upgrades

Our Bathroom Remodeling Process in Fulton

We start with a free in-home consultation to discuss your goals and assess existing plumbing, electrical, and structural conditions. You receive a detailed line-item estimate before any work begins. We handle all permits, coordinate plumbing and electrical trades, and manage the project from demolition through final inspection.

Bathroom Remodeling for Fulton Homes

Fulton sits at the intersection of Howard County and Anne Arundel County, with homes in Maple Lawn, Emerson, and Pointers View representing some of the area's most upscale housing stock. Even luxury new homes in the $800K–$1M+ range often come without decks, with basic builder cabinetry, and with no custom storage—and PRG delivers these upgrades at better value than builder premiums. Our Fulton projects typically involve upgrading laminate countertops to quartz, swapping stock cabinetry for semi-custom options, and building the outdoor living spaces these homes deserve.

Do You Need a Permit for Bathroom Remodeling in Fulton, MD?

Howard County requires a permit, through the Department of Inspections, Licenses, and Permits (DILP), for bathroom remodels that relocate plumbing, add electrical circuits, or involve structural changes. A same-location fixture and finish swap typically does not require one. DILP generally issues bathroom permits within 2–4 weeks. Required inspections: rough plumbing, rough electrical, and final. Maple Lawn and Emerson HOA review applies only if exterior changes (like a new window) are part of the project. PRG manages the full DILP process.

Why Fulton Homeowners Choose PRG

• Luxury primary-suite focus — frameless-glass tile showers, freestanding tubs, double vanities, and heated floors specified to match Fulton home values.
• Bonded waterproofing on every shower — Schluter KERDI-BOARD or Wedi, never Durock with rolled liquid membrane — critical for large curbless and tile showers.
• Better value than builder upgrades — Maple Lawn and Emerson primary baths transformed for less than the builder upcharge on a comparable spec.
• MHIC #113057, fully insured. Howard County DILP permitting managed start to finish.

Service Area

Serving Fulton (Maple Lawn, Emerson, Pointers View, Reservoir), Clarksville, Highland, Scaggsville, and Columbia. Our Gambrills shop is about 30 minutes from Fulton.

Bathroom Remodeling FAQ for Fulton, MD

Can you turn my builder-grade Maple Lawn primary bath into a spa suite?

Yes — this is our most common Fulton bathroom project. We replace the fiberglass surround and cultured-marble top with a large frameless-glass tile shower, add a freestanding tub and double vanity, and can include heated floors. The bones in these newer Maple Lawn and Emerson homes are good, so the work is about elevating finishes — typically a $35,000–$60,000+ primary-suite scope.

Do I need a Howard County permit for a Fulton bathroom remodel?

Only if you relocate plumbing, add electrical circuits, or make structural changes — which most primary-suite renovations do. A same-location fixture and finish swap does not require one. DILP generally issues bathroom permits within 2–4 weeks, and PRG handles the full process including rough and final inspections.

What waterproofing do you use for a large tile shower?

We use bonded sheet or board waterproofing — Schluter KERDI-BOARD or Wedi — on every shower, never Durock with a rolled liquid membrane. For the large curbless and frameless-glass showers common in Fulton primary suites, a fully bonded waterproofing assembly is essential to prevent leaks behind expensive tile and stone.

What bathroom upgrades are common in Fulton's newer homes?

Fulton homeowners in Maple Lawn and Emerson typically upgrade builder-grade master bathrooms—replacing standard tile with premium selections, swapping basic vanities for custom double vanities, and upgrading soaker tubs or adding frameless glass walk-in showers.

How do Fulton bathroom remodel costs compare to other areas?

Fulton projects tend toward the higher end of our range ($35,000-$60,000+) because homeowners select premium materials to match the neighborhood's upscale housing stock. Builder-grade to luxury-grade master bath transformations are the most common scope.

How much does a bathroom remodel cost in Maryland?

In Anne Arundel and Howard County, bathroom remodels typically range from $15,000-$25,000 for a standard renovation to $35,000-$60,000+ for a full gut renovation. We provide detailed line-item estimates. See our full Maryland bathroom remodel cost breakdown.

How long does a bathroom remodel take?

Most bathroom remodels take 3-6 weeks depending on scope. A straightforward update runs 3-4 weeks; full gut renovations take 5-8 weeks. Read our detailed bathroom remodel timeline guide.

Do I need a permit for bathroom remodeling in Anne Arundel County?

It depends on the scope. You typically need permits if you're moving or adding plumbing fixtures, doing electrical work beyond simple fixture swaps, or making structural changes. Cosmetic updates like new tile, vanity replacement in the same location, or painting don't require permits. We handle all permit applications and inspections.

Should I choose a bathtub or walk-in shower?

Consider your household needs. Walk-in showers are popular for accessibility, modern aesthetics, and easier cleaning. However, having at least one bathtub in your home is recommended for resale value and bathing children. For master baths, many clients choose large walk-in showers. For hall/guest baths, tub-shower combos often make more sense.

Can you make my bathroom more accessible for aging in place?

Yes, we specialize in accessibility modifications including curbless/roll-in showers, grab bars, comfort-height toilets, wider doorways, non-slip flooring, and handheld showerheads. These features can be incorporated into beautiful designs and may qualify for accessibility tax credits.