Ellicott City Bathroom Remodeling — Waverly Woods Baths

Ellicott City bathrooms we remodel are mostly in 1980s–2000s colonials in Waverly Woods, Dunloggin, Fontana Village, Turf Valley, and Ellicott City West. The pattern: builder-grade master baths with single-vanity oak cabinets, fiberglass tub-shower units, and original tile that's now dated. Older Dunloggin homes have similar issues with original 80s finishes. The newer 55+ communities at Kerger Pond and Bethany Glen drive a different request mix — walk-in showers, curbless entries, and grab-bar blocking are the most common asks there. Howard County has its own permit office and inspection process — different from Anne Arundel. MHIC #113057.

How Much Does Bathroom Remodeling Cost in Ellicott City, MD?

For an Ellicott City hall bath, budget $15,000–$30,000. A master bath with a custom tile shower, a new vanity, and a changed layout lands between $32,000 and $65,000, and a cosmetic refresh starts near $8,000. Add $250–$500 for the Howard County residential bathroom permit when plumbing or electrical moves. In the Waverly Woods and Dunloggin master baths we see most often, three numbers swing the total: tile square footage, the waterproofing system behind it, and the vanity grade — the fixtures themselves rarely move the price much. Estimates are free and itemized: 443-856-5379.

Get a Free Estimate or call 443-856-5379.

How Does PRG Handle Bathroom Remodeling Projects in Ellicott City?

The first visit is a measured walkthrough of the bath and the ceiling under it, because older Dunloggin homes occasionally hide subfloor moisture damage or undersized venting and we would rather find that before the contract than during demo. You get a selections sheet and a line-item budget for that specific room. After signing, materials are ordered and the Howard County DILP permit is filed. Demo takes two to three days and rough plumbing and electrical another two to three, then the county rough inspection, Schluter or Wedi waterproofing, tile, vanity, fixtures, the glass enclosure, and the final inspection. Plan on three to four weeks of active work for a hall bath and five to seven for a master with a custom shower. Floors are covered with rosin paper and the site is cleaned every day.

Bathroom Remodeling for Ellicott City Homes

Ellicott City's suburban neighborhoods like Waverly Woods, Turf Valley, Fontana Village, and Dunloggin feature 1980s-2000s colonials where homeowners are upgrading builder-grade kitchens, bathrooms, and adding outdoor living spaces. Newer communities like Westmount, Patapsco Crossing, Taylor Highlands by Beazer Homes, Mill Creek by Caruso Homes, and Walnut Creek by Craftmark Homes attract buyers who discover their builder-standard homes lack custom decks, quality cabinetry, and built-in storage. PRG handles the full range—from modernizing established homes to personalizing new construction with the finishes and outdoor living space builders don't include.

Do You Need a Permit for Bathroom Remodeling in Ellicott City, MD?

Howard County requires building permits for bathroom remodels involving plumbing moves, added electrical circuits, or layout changes. Permits are issued through the Department of Inspections, Licenses, and Permits (DILP) — separate from Anne Arundel County's process. Standard residential bathroom permits issue within 2–4 weeks. DILP inspects three times — rough plumbing, rough electrical, and final — and PRG files the application and schedules each inspection directly with the office.

Recent Bathroom Remodeling Projects by PRG

See more completed projects →

Why Do Ellicott City Homeowners Choose PRG?

• Howard County DILP permit experience — we file directly with the county, know the inspectors, and schedule trades around inspection windows.
• Bonded shower waterproofing on every build (Schluter KERDI-BOARD or Wedi). Critical for the master baths in older Dunloggin and Waverly Woods homes where original waterproofing was inadequate.
• Experience with 80s–2000s Howard County builder-grade construction — we know what to expect behind the walls.
• MHIC #113057, fully insured. Based in Gambrills, 25 minutes from most Ellicott City neighborhoods.

Which Areas Near Ellicott City Does PRG Serve?

Serving Ellicott City, Columbia, Fulton, Clarksville, Elkridge, and Savage. We work throughout Howard County year-round.

What Is Included in PRG's Bathroom Remodeling Service?

A bathroom remodel is one of the highest-ROI home improvements you can make. PRG handles everything from straightforward fixture upgrades to full gut renovations with layout changes, custom tile work, and accessibility modifications. See the full Bathroom Remodeling service overview.

Bathroom Remodeling Cost by Scope in Ellicott City, MD

PRG's installed 2026 price ranges for Ellicott City (labor and standard materials, final pricing after a site visit), last updated September 15, 2026 in PRG's Maryland cost guides.

Full breakdowns, per-square-foot math and line-item pricing: bathroom remodeling cost guide .

Bathroom Remodeling FAQ for Ellicott City, MD

How much does a bathroom remodel cost in Ellicott City MD?

A hall-bath remodel in Ellicott City typically costs $15,000–$30,000. A master bath with a custom tile shower, updated vanity, and new layout runs $25,000–$45,000. Cosmetic refreshes start around $8,000. Tile selection, shower waterproofing system, and vanity grade drive most of the cost variance.

Do I need a permit for a bathroom remodel in Howard County?

Yes if your project involves plumbing moves, added electrical circuits, or layout changes. Cosmetic-only work does not require a permit. Howard County issues bathroom permits through DILP within 2–4 weeks. PRG handles the entire DILP permit process for any project that needs one.

How long does a bathroom remodel take in Ellicott City?

Cosmetic work runs one to two weeks. A standard Ellicott City hall-bath remodel is 3–4 weeks of active work, and a master bath with a custom tile shower runs 5–7 weeks. Before construction starts, allow 2–4 weeks for Howard County DILP permit processing and material lead times.

Is PRG licensed and insured for bathroom remodeling in Ellicott City?

Yes — MHIC #113057, general liability insured and bonded, and working in Ellicott City and Columbia since 2016. Every Howard County permit on a PRG job is filed under that license, and the owner is on site for the critical finish work.

Are there special considerations for bathroom remodels in Old Ellicott City?

Older Ellicott City homes — particularly in areas like Dunloggin and along the Patapsco — can have stone foundations, unusual framing, and cast-iron plumbing that require specialized assessment before opening walls. We scope these conditions during the estimate so there are no surprises mid-project.

What bathroom updates are most common in Ellicott City's 1980s colonials?

Colonials in Dunloggin, Worthington, and Fontana Village commonly need master bathroom updates—replacing small tub-shower combos with walk-in showers, adding double vanities, and upgrading tile. These homes are 35-40+ years old and their bathrooms show it.

How much does a bathroom remodel cost in Maryland?

In Anne Arundel and Howard County a bathroom remodel runs $5,000–$12,000 for a cosmetic refresh, $15,000–$30,000 for a standard remodel with new tile and fixtures, and $35,000–$60,000+ for a full gut renovation with layout changes. By room, a full hall bath runs $14,000–$22,000 and a master bath $25,000–$45,000 in 2026. See the full Maryland bathroom cost breakdown.