Severna Park Deck & Screened Porch Builder — Benfield & Shipley's

Severna Park decks we build span Sabrina Park's craftsman custom builds on roughly one-acre lots, plus established Chartwell, Benfield, and Olde Severna Park. Sabrina Park buyers are typically remodeling or adding outdoor living within months of close — composite decks and screened porches are the standard ask. Olde Severna Park is established single-family with mature trees and original decks long past replacement. Composite and tropical hardwood decking are more common in this market than pressure-treated. Anne Arundel County permits required. MHIC #113057.

Screened Porch Builder in Severna Park, MD

Screened porches are the most-requested outdoor project we build in Severna Park. Sabrina Park buyers spec them within months of close, and owners of established Chartwell, Benfield, and Olde Severna Park colonials add them where an aging deck comes down. This close to the Severn, humidity and evening insects shorten the season on an open deck — a screened porch keeps the space usable from April through October.

A typical attached screened porch in Severna Park runs $22,000–$40,000 with a composite floor, screen panels, and a roof tied into the existing eave; larger builds with vaulted tongue-and-groove ceilings and finish lighting run $30,000–$45,000+. Screening in an existing covered porch costs $4,000–$10,000. Roof structure, floor framing, and electrical scope (ceiling fan, wet-rated lighting, outlets) drive most of the variance. Anne Arundel County permit fees add $150–$500 plus $50–$150 for the electrical sub-permit.

Every PRG porch uses Super Screen 17/14 vinyl-coated polyester mesh with aluminum-framed screen doors — and for properties near the water where no-see-ums are the real problem, we install Super Screen's tighter 20/20 mesh. Framing meets current IRC requirements with stainless fasteners on waterfront-adjacent builds, and we manage the Anne Arundel County permit and all three inspections start to finish. MHIC #113057.

See real 2026 numbers in our Maryland screened-in porch cost guide, and why we install Super Screen and aluminum screen doors on every porch build.

How Much Does Decks & Porches Cost in Severna Park, MD?

A pressure-treated 12x16 deck in Severna Park runs $9,000–$13,000 installed. Mid-size composite decks with aluminum railings run $16,000–$24,000. Multi-level composite builds and tropical hardwood (ipe, cumaru) decks — common in this market — run $20,000–$45,000+. Screened porch additions run $22,000–$40,000 for a typical attached structure with composite floor, screen panels, and a roof tied into the existing eave. Free estimates: 443-856-5379.

Get a Free Estimate or call 443-856-5379.

Our Decks & Porches Process in Severna Park

In-home consultation to walk the lot, measure, identify property line and setback constraints, and review material options. We produce a permit-ready design with footing details, beam and joist specs, and railing compliance. After contract, the Anne Arundel County permit is filed (1–2 weeks). Construction sequence: footings to frost line (30"), framing, county framing inspection, decking, railings, stairs, and final inspection. Standard 14x18 composite deck: 2–3 weeks active. Tropical hardwood and multi-level builds: 4–6 weeks. Screened porch additions: 4–5 weeks.

Outdoor living space adds usable square footage and real value to your Maryland home. PRG builds custom decks, screened porches, and covered outdoor areas using pressure-treated lumber, composite, and PVC materials suited to the local climate.

Decks & Porches Services We Offer in Severna Park

• Custom deck design and construction in wood or composite
• Screened porches and three-season rooms
• Covered porches with roofing that matches your home
• Multi-level decks with stairs, landings, and built-in seating
• Pergolas, arbors, and shade structures
• Deck replacement and resurfacing of aging structures

Our Decks & Porches Process in Severna Park

We design your deck around how you plan to use it — dining, entertaining, relaxing, or all three. We prepare permit-ready plans showing footings, framing, and railing details, handle the Anne Arundel or Howard County permit application, and build to code with inspections at every stage.

Decks & Porches for Severna Park Homes

Severna Park is one of Anne Arundel County's most desirable communities, with excellent schools and proximity to both Baltimore and Annapolis. Many homes here were built in the 1970s-1990s and need kitchen and bathroom updates for modern living. Even high-end new builds like The Reserve at Severna Park and Enclave at Oak Hill often need custom decks, screened porches, and built-in cabinetry that builders don't include. PRG works on projects ranging from kitchen remodels in established colonials to outdoor living spaces in planned communities throughout Severna Park.

Do You Need a Permit for Decks & Porches in Severna Park, MD?

Anne Arundel County requires building permits for all new deck construction. Standard residential deck permits issue within 1–2 weeks. Required inspections: footings, framing, and final. PRG prepares engineered drawings and handles the entire application and inspection process.

Why Severna Park Homeowners Choose PRG

• Custom-build experience — Sabrina Park craftsman homes and Olde Severna Park lots support designs that don't fit a standard suburban template. We design around the lot, the trees, and the way you actually use the yard.
• Composite and tropical hardwood decking expertise (Trex, TimberTech, Fiberon, ipe, cumaru) — installed correctly with proper joist spacing, ventilation, and stainless fasteners.
• MHIC #113057, fully insured. Anne Arundel County permits managed start to finish.

Service Area

Serving Severna Park, Arnold, Pasadena, Millersville, Crownsville, and Annapolis. We work throughout the Severna Park area year-round.

Decks & Porches FAQ for Severna Park, MD

Do I need a permit for a deck in Severna Park MD?

Yes — all new deck construction in Anne Arundel County requires a building permit. Standard turnaround is 1–2 weeks. Required inspections are footings, framing, and final. PRG prepares engineered drawings and handles the application and every inspection.

What type of decking is best for waterfront properties?

For waterfront and waterfront-adjacent properties, composite (Trex, TimberTech, Fiberon) is the standard recommendation — it handles humidity and salt exposure better than pressure-treated lumber and doesn't need annual sealing. Tropical hardwoods like ipe and cumaru are also popular, but they require periodic oiling and cost significantly more. We use stainless-steel fasteners on every waterfront-adjacent build to avoid corrosion staining.

How much does a composite deck cost in Severna Park?

A mid-size composite deck with aluminum railings runs $16,000–$24,000 in Severna Park. Multi-level builds and larger composite decks with built-in seating, lighting, and stairs to grade run $20,000–$45,000+. Tropical hardwood (ipe, cumaru) decks run higher because of material cost.

Do I need a permit for a screened porch in Severna Park MD?

Yes. A screened porch involves foundation, framing, and roofing work, so Anne Arundel County requires a building permit plus an electrical sub-permit when circuits are added. Standard permits issue within 1–2 weeks, with footing, framing, and final inspections. HOA communities like Shipley's Choice and The Reserve also require architectural review for exterior structures — PRG prepares the county and HOA packages together.

How much does a screened porch cost in Severna Park?

A typical attached screened porch in Severna Park runs $22,000–$40,000, including composite floor, screen panels, a roof tied into the existing eave, ceiling fan box, and electrical rough-in. Larger porches with vaulted tongue-and-groove ceilings and finish lighting run $30,000–$45,000+. Screening in an existing covered porch runs $4,000–$10,000.

Which screen mesh is best for a porch near the Severn River?

Super Screen's standard 17/14 vinyl-coated polyester mesh handles most Severna Park porches — it has 300% greater tear strength than fiberglass and doesn't go brittle under UV. For waterfront and waterfront-adjacent properties where no-see-ums and gnats are the real nuisance, we install Super Screen's 20/20 mesh: a tighter weave that blocks the smallest biting insects with a modest trade-off in airflow. Both pair with aluminum-framed screen doors that won't warp or sag.

How long does it take to build a screened porch in Severna Park?

Plan for 8–16 weeks from first conversation to finished porch, including Anne Arundel County permitting, any HOA review, and material lead times. Active construction is typically 3–6 weeks: footings and framing, county framing inspection, roofing, electrical, then ceiling, screen panels, doors, and trim ahead of final inspection.

What decking material works best for Severna Park homes?

For Severna Park homes in Benfield and Shipley's Choice, we recommend composite decking like Trex or TimberTech. Maryland humidity and UV exposure break down pressure-treated wood faster, and composite holds up better with no annual maintenance required.

Can you build a multi-level deck for a Severna Park colonial?

We design elevated and multi-level decks for Severna Park colonials in Benfield and Shipley's Choice. Features like composite decking, built-in seating, pergolas, and covered sections create outdoor living spaces that become the highlight of the home.

How much does it cost to build a deck in Maryland?

Deck costs in Anne Arundel and Howard County range from $15,000-$25,000 for a basic pressure-treated wood deck to $40,000-$80,000+ for larger composite decks with premium features. See our full Maryland deck building cost breakdown.

What's the difference between wood and composite decking?

Pressure-treated wood costs less upfront ($15-$25/sq ft) but requires annual maintenance and lasts 15-20 years. Composite ($30-$50/sq ft) is maintenance-free and lasts 25-30+ years. Read our composite vs. wood decking comparison.

Do I need a permit to build a deck in Anne Arundel County?

Yes. Anne Arundel County requires building permits for new deck construction. You'll need to submit plans showing deck size, height, attachment method, footing locations, and railing details. Inspections are required for footings, framing, and final completion. We handle the entire permit process including plan preparation and inspection scheduling.

What size deck do I need?

Consider your intended use. For a dining table and 6 chairs, plan at least 12x12 feet. Add a grill area plus seating: 14x16 feet or larger. Hot tubs need additional structural support and typically a dedicated 10x10 section. For multiple zones (dining, lounging, grilling), 400-600 square feet provides comfortable space.

Can you add a roof or pergola to my deck?

Yes. Options include pergolas (partial shade, architectural interest), solid roof extensions matching your house, retractable awnings, and screen enclosures. Each requires proper structural support—we often upgrade deck framing to handle additional loads. Covered spaces require permits. We design covered areas that complement your home's architecture.