Tile Installation in Gambrills, MD

Tile is where a bathroom or kitchen remodel is made or broken, and Gambrills homeowners in Waugh Chapel, Covington, and the newer Crofton-adjacent communities call PRG when they want tile done right the first time. From large-format porcelain shower walls to herringbone backsplashes and heated floor tile, we set every job over a properly prepared, waterproofed substrate — not over green board or bare drywall. PRG is based in Gambrills, so this is our home turf.

How Much Does Tile Installation Cost in Gambrills, MD?

Tile installation in the Gambrills area typically runs $12–$25 per square foot for standard porcelain or ceramic, installed over a prepared substrate, with natural stone, large-format, and intricate mosaic or pattern work running $25–$45+ per square foot. A standard tub-surround or shower runs roughly $2,500–$6,000 installed including waterproofing; a full bathroom floor and shower can land $4,000–$9,000 depending on tile selection and prep. Backsplashes typically run $1,200–$2,500. Heated-floor systems add $10–$20 per square foot. Final pricing depends on substrate condition, layout complexity, and material.

Get a Free Estimate or call 443-856-5379.

How Does PRG Handle Tile Installation Projects in Gambrills?

We start by assessing the substrate and demoing any failed tile or water-damaged backer. Next we build the proper assembly — cement board or foam backer, then a bonded waterproof membrane in wet areas, with corners and seams sealed. We dry-lay the layout so patterns center on focal points and cuts fall at edges, then set tile with the correct trowel and mortar for the tile size. After cure we grout, seal natural stone where needed, and install movement joints. Most single-room tile projects take 3–6 working days depending on size and whether mud-set or heated floors are involved.

Tile Installation for Gambrills Homes

Gambrills is where PRG Home Improvement is headquartered, and we know the area's housing stock better than anyone. Many homes sit on generous lots with mature landscaping, making deck and porch additions a natural fit. The mix of established colonials and newer construction in Covington and along Gambrills Road means remodeling needs vary—from updating dated 1990s kitchens to upgrading new builds that come with stock cabinets, laminate countertops, and no deck. Our proximity means faster response times and familiarity with local suppliers and inspectors.

Do You Need a Permit for Tile Installation in Gambrills, MD?

Tile installation itself does not require a permit in Anne Arundel County — it is a finish. However, when tile is part of a larger bathroom or kitchen project that relocates plumbing or alters electrical, the underlying work is permitted through the Anne Arundel County Office of Inspections and Permits. PRG handles any required permits as part of the broader remodel and ensures wet-area tile is set over a code-compliant waterproof assembly.

Recent Tile Installation Projects by PRG

See more completed projects →

Why Do Gambrills Homeowners Choose PRG?

• Based in Gambrills — we know local homes from Waugh Chapel to Covington and the builder-grade finishes that come standard in this area.
• Every wet-area tile job is set over a real waterproofing system (Schluter KERDI, GoBoard, or a properly applied liquid membrane), never just cement board alone.
• Large-format porcelain, natural stone, mosaic, and heated-floor tile — flat lippage-free layouts with properly planned grout lines and movement joints.
• Owner-present installation: Anton lays out every job so cuts land in the right places and patterns stay symmetrical around niches, windows, and fixtures.

Which Areas Near Gambrills Does PRG Serve?

Serving Gambrills, Crofton, Odenton, Millersville, and the surrounding Anne Arundel County communities from our Gambrills home base.

What Is Included in PRG's Tile Installation Service?

A bathroom remodel is one of the highest-ROI home improvements you can make. PRG handles everything from straightforward fixture upgrades to full gut renovations with layout changes, custom tile work, and accessibility modifications. See the full Tile Installation service overview.

Bathroom Remodeling Cost by Scope in Gambrills, MD

PRG's installed 2026 price ranges for Gambrills (labor and standard materials, final pricing after a site visit), last updated August 11, 2026 in PRG's Maryland cost guides.

Full breakdowns, per-square-foot math and line-item pricing: bathroom remodeling cost guide .

Tile Installation FAQ for Gambrills, MD

Do you waterproof behind shower tile, or just use cement board?

We waterproof. Cement board is not waterproof on its own — water passes through it. For every shower we install a bonded waterproofing system such as Schluter KERDI or GoBoard, or a properly applied liquid membrane, so moisture never reaches the framing. See our guide comparing shower waterproofing systems for the full breakdown.

Can you install large-format porcelain tile in Gambrills bathrooms?

Yes. Large-format porcelain (12x24, 24x48, and slab) is one of our most-requested looks. It requires a dead-flat substrate, large-format mortar, and careful lippage control with leveling clips. We assess and, if needed, re-float the substrate so big tiles lie perfectly flat with minimal grout lines.

Do you install heated tile floors?

We do. Electric radiant mats or cables are installed over the substrate, embedded in self-leveling or thinset, then tiled over. It is a popular upgrade for Gambrills master baths. We coordinate the required electrical with a licensed electrician and tie the thermostat in as part of the project.

How much does tile installation cost in Gambrills, MD?

Standard porcelain or ceramic installation in the Gambrills area runs about $12–$25 per square foot installed, while natural stone, large-format, and detailed pattern work runs $25–$45+. A tub surround or shower typically runs $2,500–$6,000 installed including waterproofing. Final pricing depends on substrate prep, layout complexity, and tile choice.

What kind of tile work does PRG do in Gambrills?

We install shower and tub-surround tile, bathroom and kitchen floors, kitchen backsplashes, fireplace surrounds, mudroom and laundry floors, and heated-floor systems. We handle porcelain, ceramic, natural stone, and mosaic, always set over a properly prepared and — in wet areas — waterproofed substrate.

How much does a bathroom remodel cost in Maryland?

In Anne Arundel and Howard County a bathroom remodel runs $5,000–$12,000 for a cosmetic refresh, $15,000–$30,000 for a standard remodel with new tile and fixtures, and $35,000–$60,000+ for a full gut renovation with layout changes. By room, a full hall bath runs $14,000–$22,000 and a master bath $25,000–$45,000 in 2026. See the full Maryland bathroom cost breakdown.