Whole-House Remodeling in Millersville — Old Mill & Manor

Millersville whole-house renovations we handle range from 1980s–2000s colonials and transitionals in planned communities — Old Mill, Millersville Manor, Benfield, The Willows — to older farmhouses and custom homes on rural lots along Old Mill and Millersville Roads. Older Old Mill colonials have dated oak kitchens, original baths, and aging finishes; newer Willows and Residences at Millersville homes have builder-standard selections owners want to elevate. We renovate both top to bottom, central in Anne Arundel County. MHIC #113057.

How Much Does Whole-House Remodeling Cost in Millersville, MD?

Whole-house renovations in Millersville typically run $100,000–$300,000+ depending on square footage and scope. A refresh of a 1990s Old Mill colonial (kitchen, baths, flooring, trim, paint) often lands in the $130,000–$200,000 range, while a full gut that reworks the layout and updates systems runs $220,000–$300,000+; larger custom or rural homes can exceed that. Older Old Mill homes occasionally carry polybutylene supply lines worth replacing during the project, which we flag in the estimate. Cabinet tier and structural scope drive most of the cost. We provide a line-item budget after the consultation. Free estimates: 443-856-5379.

Get a Free Estimate or call 443-856-5379.

Our Whole-House Remodeling Process in Millersville

We begin with an in-home consultation to measure, review goals, and identify hidden conditions — polybutylene supply in older Old Mill homes, well-and-septic constraints on rural lots, panel capacity. We produce a phased scope and line-item budget. After contract we order long-lead items, file the Anne Arundel County permits, and submit any required HOA or Health Department paperwork. Work runs zone by zone with rough trades, inspections, and finishes. A colonial refresh runs 8–12 weeks; a full gut runs 4–7 months. We protect finished areas and clean daily.

When your home needs more than one room updated, a coordinated whole-house renovation saves time, reduces cost, and delivers a cohesive result. PRG manages multi-room and full-home projects from planning through final walkthrough.

Whole-House Remodeling Services We Offer in Millersville

• Coordinated kitchen, bathroom, and living space renovations
• Flooring replacement throughout the home
• Interior and exterior painting as part of larger renovations
• Electrical and plumbing system updates
• Structural modifications including wall removal and room additions
• Window, door, and trim replacement

Our Whole-House Remodeling Process in Millersville

Whole-house projects require careful phasing to keep the job manageable and, when possible, let you stay in your home. We create a detailed project schedule with clear phases, coordinate all trades, handle every permit, and provide regular progress updates. One point of contact manages your entire project.

Whole-House Remodeling for Millersville Homes

Millersville's central Anne Arundel County location and mix of planned communities and rural properties create diverse remodeling needs. Homeowners in developments like Old Mill seek kitchen and bathroom updates for late-1990s homes, while newer communities like The Willows and Residences at Millersville attract families who quickly discover their builder-standard homes need deck additions, kitchen upgrades beyond basic cabinetry, and custom storage. PRG's familiarity with both HOA requirements and custom work on larger properties makes us well-suited for Millersville projects.

Do You Need a Permit for Whole-House Remodeling in Millersville, MD?

Whole-house renovations in Millersville require permits through the Anne Arundel County Office of Inspections and Permits — typically separate building, electrical, plumbing, and mechanical permits with individual inspections. Allow roughly 4–6 weeks for review and issuance on a full project. Rural Millersville and Old Mill Road properties are often on well and septic, so fixture increases may require Health Department sign-off, and planned communities may add HOA review for exterior changes. PRG files all permits and coordinates inspections.

Why Millersville Homeowners Choose PRG

• Central Anne Arundel location familiarity — we source from both Annapolis and Glen Burnie suppliers and know the Old Mill, Millersville Manor, and The Willows housing stock.
• Mixed-era experience — from 1980s oak-kitchen colonials to newer builder homes, we scope each to the right level of work.
• HOA and well-and-septic aware — exterior-change submissions and plumbing-capacity planning handled where they apply.
• MHIC #113057, fully insured. Anne Arundel County permitting across all trades managed start to finish.

Service Area

Serving Millersville (Old Mill, Millersville Manor, Benfield, The Willows), Severna Park, Gambrills, Crownsville, and Severn. Our Gambrills shop is 10–15 minutes away.

Whole-House Remodeling FAQ for Millersville, MD

Do older Old Mill homes in Millersville have plumbing issues to address during a remodel?

Some late-1990s Old Mill homes were built with polybutylene supply lines, which are prone to failure and worth replacing during a whole-house project while walls are open. We inspect for this during the consultation and include any needed replacement in the estimate so it is planned rather than an emergency later.

My Millersville home is in an HOA community — does that affect a whole-house renovation?

Interior work generally does not need HOA review, but exterior changes — decks, windows, doors, siding — do in planned communities like Old Mill and The Willows. PRG prepares and submits the architectural review package for those elements and runs it alongside the Anne Arundel County permit process.

Can you renovate a rural Millersville home on well and septic?

Yes. We account for well water pressure when specifying fixtures and confirm the septic system can support any added bathrooms before finalizing the design. Anne Arundel County may require Health Department sign-off for fixture-count increases on rural Old Mill and Millersville Road properties, which we coordinate as part of the permit process.

Are Millersville's 1990s homes ready for whole-house renovation?

Yes, homes in Old Mill and established Millersville neighborhoods are 25-30 years old with original kitchens, bathrooms, and finishes that need updating. The construction is solid, making these excellent renovation candidates. A comprehensive update significantly increases both comfort and market value.

What does a typical whole-house renovation include for Millersville colonials?

A typical scope includes kitchen remodel, two bathroom renovations, new flooring throughout, interior painting, and updated lighting. Many homeowners also add a deck or patio. Budget ranges from $80,000-$200,000 depending on scope and finishes selected.

What's included in a whole-house remodel?

Whole-house remodeling can include kitchen and bathroom renovations, flooring throughout, paint and trim, electrical and plumbing updates, HVAC improvements, structural changes (removing walls, adding rooms), window and door replacement, and basement or attic finishing. We coordinate all trades and manage the entire project.

How much does a whole-house renovation cost in Maryland?

Whole-house renovation costs vary dramatically based on scope. Cosmetic updates throughout (paint, flooring, fixtures) run $50,000-$100,000. Mid-range renovations with new kitchen, bathrooms, and systems updates run $150,000-$300,000. High-end gut renovations with additions can exceed $300,000-$500,000+. We provide detailed phased estimates.

How long does a whole-house remodel take?

Timeline depends on scope. Cosmetic updates throughout take 2-4 months. Full renovations with kitchen, bathrooms, and systems work take 4-8 months. Gut renovations with structural changes or additions can take 8-12+ months. We create detailed schedules with milestones and keep you updated throughout.

Can I live in my house during a whole-house renovation?

It depends on scope. For phased renovations where we complete one area at a time, you can often stay. For gut renovations involving systems work (electrical, plumbing, HVAC), moving out for 2-4 months may be necessary for safety and project efficiency. We'll discuss logistics and help you plan during the estimate.

Do you handle permits for major renovations?

Yes, we manage all permitting for whole-house projects. This typically includes building permits, electrical permits, plumbing permits, mechanical permits, and any required engineering reviews. We coordinate with Anne Arundel and Howard County building departments and schedule all required inspections.